Your cart is empty

Car CoversTruck CoversRV CoversLimousine CoversHearse CoversMotorcycle CoversScooter CoversGolf Cart Covers
My AccountFAQsContact Us
1-800-916-6041
FLASH DEAL: Save an Extra 15% at Checkout! Use Coupon Code USA15
60% Off On All Car Covers
Fall Sale!

Motorcycle Cover Installation Guide

This installation guide covers everything included with your Motorcycle Cover, step-by-step installation instructions, and answers to common questions.

What's Included in the Box

  • 1 x Motorcycle Cover
  • 1 x Storage Bag
  • 1 x Strap and Buckle sewn into the middle of the cover for secure fastening

How to Install your Motorcycle Cover

Begin by unfolding the cover and identifying the front section. Place it over the headlight area, gently pulling it down across the windshield and tucking the elastic hem under the headlight. Work your way toward the rear of the motorcycle, carefully sliding the cover down both sides, avoiding sharp or protruding areas. Once the cover is positioned at the back, pull it snugly around the rear wheel and secure the belly strap underneath the motorcycle for a tight, wind-resistant fit.

Warnings

  • Do NOT cover a wet motorcycle. Always dry it first to avoid trapped moisture.
  • Do NOT cover a hot exhaust or tailpipe. Allow it to cool to prevent heat damage.
  • Do NOT cover immediately after riding. Let the engine and components cool before installation.

How to Remove your Motorcycle Cover

To remove your motorcycle cover, simply reverse the installation process. Carefully fold the cover to avoid dirt transfer and return it to the included storage bag for safekeeping.

Frequently Asked Questions

How can I identify the front of the cover?

Each cover comes with a white tag clearly labeled "FRONT." If the tag is missing, the tagged end of the cover is still the front.

How should I wash my cover?

For the best results, hand washing is recommended. Install the cover on your motorcycle, rinse thoroughly with water to remove dust and debris, then clean with a soft cloth and a mild multi-purpose cleaner. Rinse again and either towel dry or allow the cover to air dry completely.

If machine washing is preferred, use a gentle cycle with cold water only. Dilute 1/4 cup of Simple Green in 1 cup of water and wash without bleach or fabric softener. Never use harsh chemicals, as they can damage the fabric.

More Installation Guides

Still can't find the installation guide you’re looking for? Need further assistance? Let our team help you! Contact us or call us directly at 1-800-916-6041.