When drivers first see their car cover, they're often at a loss for what to do with it. While they'll generally be marked with “this side down” on the appropriate side, actually getting it onto a car is another task altogether. It's important to get a snug finish since any looseness will compromise the protective qualities of the car cover. Let's take a look at the two most simple, but most effective ways of installing a car cover:

Exterior

One of the easiest ways and probably the most intuitive way of installing a car cover is simply tugging it downwards when it's on the car. First, drivers will want to lay the cover flat on the roof, then drag it down towards the ground taking particular car to ensure the cover fits neatly between the wheels. Following this method is particularly good for vehicles with awkward or specialty wing mirrors and will be especially easy to follow when car covers come pre-installed with specialty mirror coverage. While quick, it's not usually the easiest way of getting things done though. The end finish can sometimes be pretty loose and this will expose the vehicle to the harsh elements and provide inadequate protection in storms or other situations when the cover needs to be on there properly. If there is anything loose, it could become free and sway in the wind, which will scratch the vehicle and leave it completely exposed to damage.

Any installation can benefit from cable locks and using them after following this procedure would definitely be appropriate. They will secure the car cover in place in order to keep everything stable and fitted. It's also necessary to consider cable locks when using lightweight car covers in harsher conditions, since they will help secure the fit for longer periods when a lightweight car cover would otherwise become dislodged in the wind or other stormy conditions.

Back to Front

When precision is required, such as when drivers are installing a car cover for long term storage, then following the cover from back to front would be most suitable. This is usually quite easy to do since modern car covers such as those available from www.carcover.com will have a “front” label attached to the appropriate area to help guide drivers when installing a cover. It's usually easier to get the snuggest finish possible by doing this, but strafing from right to left can be difficult once the cover is securely on the front of the car. This can be eliminated simply by being a little loose in the beginning, then tightening the finish.